It is a little after six in the morning in north Karnataka, and the cutter has already been at work for an hour. The grass it is taking down stands taller than the man driving it, thick green stalks that were barely knee high two months ago. By the time the sun is properly up, a trailer will carry twenty odd tonnes of it to a concrete pit a few kilometres away, where it will be chopped, packed and sealed. Some weeks from now that grass will become methane. Scrubbed and compressed, it will move a city bus or fire a factory boiler.
That is the picture most people carry in their heads when they talk about Napier grass and compressed biogas. It is a good picture. It is also about half the story.
We have spent more than twenty five years around anaerobic digesters, in India and abroad, and we have watched Napier travel from an agronomist’s fodder crop to the most discussed feedstock in the country’s CBG programme. Along the way we have seen Napier plants run well, and we have seen them sink, sometimes within a year of commissioning. The difference between the two almost never lies in the steel. It lies in the grass, in the calendar, and in a handful of numbers that rarely make it onto the first slide of an investor presentation.
This is the first of two parts. Here I follow the grass from the field into the digester and out again, as raw biogas and as digestate. The second part will take up what must happen to that gas before anyone can sell it.
Why everyone suddenly wants grass
The appeal is easy to understand. For years, Indian CBG projects have leaned on press mud from sugar mills, on cattle dung and on municipal waste. Each comes with a catch. Press mud arrives with the crushing season and vanishes for months. Dung is scattered across thousands of small herds. Municipal waste brings contamination and politics.
Napier asks for none of that. The bajra Napier hybrids, including the CO4 and CO5 lines bred at Tamil Nadu Agricultural University, are perennial. Plant once and the field gives cut after cut for five years or more. For a developer it offers something genuinely rare in this business, a feedstock you can schedule.
Policy has added urgency. The SATAT programme set out to build thousands of compressed biogas plants, and only a small fraction of that number is running today. City gas distributors now face a blending obligation for CBG that starts small and climbs year on year. For the first time, demand is not the question. Supply is. A feedstock that can be grown to order looks like the missing piece, and in many ways it is.
The arithmetic that should come first
Before we talk about digesters, I ask every promoter to sit with one calculation.
A tonne of CBG holds roughly 2500 cubic meters of raw biogas. A tonne of fresh Napier, digested in a real plant by real operators, yields somewhere around 85 to 120 cubic metres of raw biogas based on the total and volatile solid contents. Divide one by the other and you arrive at a number that quietly decides the fate of the project that’s about roughly 25 tonnes of fresh grass for every tonne of gas you sell.
A 10 TPD plant therefore eats around 240 – 260 tonnes of Napier a day, close to 91,000 tonnes a year.
Now the field. Brochures quote 300 – 350 tonnes per acre per year, sometimes more. We have seen such yields on well tended demonstration plots. We have rarely seen them hold across hundreds of acres, farmed by many different hands, through a weak monsoon and a bad pest year. A sustained figure of 150 to 200 tonnes is far closer to what a project can bank on. At 150 tonnes, that 10 TPD plant needs something like 600 acres under continuous cultivation, and a sensible promoter keeps a buffer on top of that.
If the yield is only 150 tonnes per acre per year then the required six hundred acres is not a farm. It is a village economy. It means agreements with hundreds of growers, harvest rosters, weighbridges and payment cycles that farmers can trust. The plants I have seen struggle were rarely beaten by their digesters. They were beaten by their supply chains.
The calendar is the real enemy
The single most powerful lever in a Napier plant sits in the field, not in the tank.
Cut at 60 to 75 days, the grass is leafy and soft. Its dry matter sits around 20 to 24 percent, and the fibre has not yet been locked up by lignin, the woody glue that microbes find so hard to break. It digests well. Leave it standing to 100 – 120 days and beyond and the picture changes. The stems harden. You harvest more tonnes per acre, but each tonne gives less methane and leaves more undigested fibre behind.
Here the farmer’s interest and the plant’s interest pull in opposite directions. A grower paid by the tonne will naturally let the crop stand a little longer. The plant pays for that weight and gets less gas from it. The fix is a clause, not a machine so link the price to dry matter, or fix the cutting interval in the supply agreement, and enforce it.
One more field detail costs more than people expect. Cut the grass too close to the ground and soil comes with it. Sand does not digest. It settles at the bottom of the digesters, month after month, and quietly steals effective volume until somebody wonders why the gas has dropped. Cutting height is an operating parameter. Treat it like one.
The pit or bunker is the warehouse
The most underrated piece of infrastructure on a Napier site is a flat slab of concrete with walls on three sides.
Fresh grass will not wait. Within a day or two of cutting it begins to heat and lose energy, and in the heaviest monsoon weeks harvesting may stop altogether. The answer is silage. The grass is chopped to roughly 10 to 25 millimetres, spread in thin layers, rolled hard by a heavy tractor until the air is driven out, and sealed under good sheeting weighed down end to end. Lactic acid bacteria take over, the pH falls, and the material keeps for months.
Silage is never free. With careful work, dry matter losses of 6 to 12 percent are normal. With torn covers, loose compaction or a face left open to the air for days, the losses climb quickly. Badly made silage, where butyric fermentation wins, has a smell of rancid butter that any experienced operator recognises from fifty metres, and it carries its problems straight into the digester.
We have advised clients to build silage storage for at least two to three months of feed, more if the local monsoon is long, and to give the bunker the same attention they give the digester. A plant can survive a broken pump. It rarely survives an empty pit in August.
Inside the tank
Once the grass reaches the digester, the slowest step in the whole biology becomes the one that matters which is hydrolysis, the breaking of tough plant fibre into sugars that the microbial community can actually use. Napier is not food waste. It does not fall apart in a few days. Every design choice inside the tank follows from that.
Most Indian Napier plants run mesophilic, at 37 to 40 °C, in wet, continuously stirred digesters where the contents are kept at about 8 to 10 percent solids. Recirculated liquid from the digestate supplies most of the dilution. I prefer to start conservatively, with an organic loading of 2.0 to 3.0 kg of volatile solids per cubic metre per day and a retention time of 45 to 55 days. Shorten it and the gas does not disappear, it simply walks out through the screw press as undigested carbon.
Then there is the floating problem. Grass fibre is light. Left without proper mixing, it rises and knits itself into a mat on the surface, which traps gas, blocks outlets and turns a third of the tank into dead space. Mixer type, mixer position and run time are therefore design decisions, not lines picked from a catalogue.
Numbers that survive real life
Everybody wants to know the gas yield, so here it is, plainly.
Laboratory tests on young Napier often report 340 to 480 normal cubic metres of methane per tonne of volatile solids. Those tests are honest, but they run in small bottles at perfect temperature. Full scale plants, with real silage, real operators and real monsoons, typically deliver 280 to 340.
On fresh grass at 18 to 20 percent dry matter, that means roughly 60 to 70 cubic metres of raw biogas per tonne, at 52 to 55 percent methane. This is the basis of the 25 to 30 tonne figure above. If someone offers you a plant that will make a tonne of CBG from 18 tonnes of Napier, ask to see twelve months of operating records from a running unit.
The six month cliff
There is one failure we have seen so often that we now warn clients about it before the first concrete is poured.
A plant fed only on grass usually starts beautifully. Gas climbs, the operators relax, the investors smile. Then, somewhere between the fourth and the sixth month, propionic acid begins to creep upward. The FOS/TAC ratio, the operator’s simple measure of acid against buffering capacity, drifts past 0.4. Gas production starts to slide. By the time the owner calls, the reactor is in trouble, and the blame lands on the weather or the inoculum.
The real cause is usually hunger of a very particular kind. Methane forming microbes depend on tiny amounts of trace metals and these have to be considered irrespective of the napier grass breed. Grass carries little of them. Dung and press mud bring them naturally. A Napier plant must supply them deliberately.
The remedy is unglamorous, and it works. Test volatile fatty acids and alkalinity every week. Dose trace elements, enzymes and specialized cultures against laboratory analysis rather than habit. Where dung is available, blend in 5 to 20 percent on a solid’s basis for its minerals and buffering. Watch ammonia as well, though on Napier it is rarely the first thing to go wrong.
Enzymes and specialised microbial cultures, which happen to be our own field, can speed the breakdown of tough fibre and lift yields by a few percent. We will say what we tell every client, they support good operation. They do not replace it.
What comes out the other end
For every hundred tonnes of material fed into the digester, roughly 50 to 80 tonnes leave it as digestate, depending on the technology selection and TS in feed and outlet.
A screw press splits the stream in two. The solid fraction comes out at around 25 to 30 percent dry matter. The liquid carries perhaps 2 to 4 percent solids, and it is quietly precious, because it supplies most of the dilution water the grass needs.
But a fully closed loop has its own slow poison. Salts and ammonia build up cycle after cycle. Part of that liquid must be bled off regularly and returned to the land as liquid fertiliser. A plant without a plan for that bleed eventually starts to choke on its own water.
The solids, once cured and dried, become Fermented Organic Manure. On realistic assumptions, a Napier plant produces about 4 – 5 tonnes of saleable FOM for every tonne of CBG. Larger figures usually count water as product. The FOM market in India is still young, slow and price sensitive, and the market development assistance on offer helps without changing that. We advise clients not to budget FOM revenue and if they want to budget then it has to be done cautiously and build the market patiently.
And to start building it close to home. Napier is a hungry crop. It pulls large amounts of potassium and nitrogen out of the soil with every cut. Returning digestate to the fields that grew the grass cuts the farmer’s fertiliser bill, supports the next harvest and gives him a reason to stay with the project that has nothing to do with the price per tonne. The best customer a Napier plant will ever have for its manure is the farmer who supplies its feedstock.
Halfway there
So far, we have a field, a bunker, a digester, and two streams leaving it. One is a digestate that becomes either an asset or a headache, depending on how seriously it was planned. The other is a gas that is barely half methane, saturated with water, laced with hydrogen sulphide and carrying almost as much carbon dioxide as fuel.
That gas is not yet a product. Turning it into something a vehicle engine or a gas grid will accept is a separate discipline, with its own choices, its own costs and its own quiet ways of losing money. That is where Part II begins.
Discover more from BioEnergy Consultant
Subscribe to get the latest posts sent to your email.


1 Comment